Asus X900-PI - Manual (Page 86)

86
5. SOFTWARE SETUP
P3C-E User’s Manual
5. S/W SETUP
Windows 98
5.4 Intel LDCM Client Setup
System Requirements
• Intel® Pentium® microprocessor or higher.
• Operating system: Microsoft Windows 95 (can be OEM Service Release 2), or
Windows 98, or Windows NT 4.0 (Service Pack 4 or later).
• Microsoft Internet Explorer 4.01 or higher.
• Memory: 16 MB of RAM for Windows 95/98; 24 MB of RAM for Windows NT
(32 MB recommended).
• Disk storage space: 100 MB of available hard disk space to install; 40-100 MB
of available hard disk space to run (depending on cluster size).
• Hardware system: DM or SM BIOS is required for full LDCM functionality.
• Protocols: IP (Winsock-enabled) communication protocol loaded on the client.
An IP stack is required on the client, regardless of whether the client accesses
the network.
• Monitor resolution of 600x800, 256 colors or greater.
Insert the Support CD that came with your motherboard into your CD-ROM drive
or double-click the CD drive icon in My Computer to bring up the setup screen.
NOTE: LDCM will not run if another hardware monitoring utility, such as ASUS
PC Probe, is installed. To uninstall any program, see 5.13 Uninstalling Programs.
(2) Click here.
(1) Click here.
(4) Click here.
(3) Click here.