Asus X900-PI - Manual (Page 40)

40 ASUS P3C-E User’s Manual
Connectors
3. H/W SETUP
3. HARDWARE SETUP
6) Joystick/MIDI Connector (Gold 15-pin GAME_AUDIO) (optional)
You may connect game joysticks or game pads to this connector for playing
games. Connect MIDI devices for playing or editing professional audio.
Joystick/Midi (15-pin Female)
7) Audio Port Connectors (Three 1/8” GAME_AUDIO) (optional)
Line Out (lime) can be connected to headphones or preferably powered speak-
ers. Line In (light blue) allows tape players or other audio sources to be re-
corded by your computer or played through the Line Out (lime). Mic (pink)
allows microphones to be connected for inputting voice.
Mic Line In Line Out
1/8" Stereo Audio Connectors
8) Chassis Intrusion Lead (2-pin CHASSIS)
This lead is for a chassis designed for chassis intrusion detection. After-market
toggle switches may also be installed to the chassis panel or on any removable
components. Two wires should be available from the chassis to connect to this
lead. When any chassis component is removed, the circuit should open and the
motherboard will record a chassis intrusion event. The event can then be pro-
cessed by software such as LDCM. If the chassis intrusion lead is not used, a
jumper cap must be placed over the pins to close the circuit.
P3C-E Chassis Open Alarm Lead
CHASSIS
1
P3C-E
P ARALLEL
PORT
OPTIONAL
4 3 2 1
+5Volt
(Power Supply Stand By)
Ground
Chassis Signal