Asus K8V - Manual (Page 80)

3-10 Chapter 3: Software support
5. Select Start Create Process and press to setup hard disk for RAID
system. The following confirmation message appears:
Use arrow keys to move selection bar on items and press to select.
Press to confirm or to return to the configuration options.
RAID 1 for data protection
1. Select the second option item Array Mode, then press . The RAID
system setting pop-up menu appears.
2. Select RAID 1 for data protection from the menu and press . Select
next task from pop-up menu. The task Create only creates the mirrored set
without creating a backup. Create and duplicate creates both mirrored set
and backup.
The data on the selected disks will
be destroyed. Continue? Press Y/N
4K
8K
16K
32K
64K
RAID 0 for performance
RAID 1 for data protection
RAID 0/1
RAID SPAN for capacity
RAID 1 for data protection
Create only
Create and duplicate
Create only
3. Select task and press . The screen returns to Create Array menu
items. From this point, you may choose to auto-configure the RAID array by
selecting Auto Setup for Data Security or manually configure the RAID array
for mirrored sets. If you want to manually configure the RAID array continue
with next step, otherwise, proceed to step 5.
TIP: For server systems, use of a lower array block
size is recommended. For multimedia computer
systems used mainly for audio and video editing, a
higher array block size is recommended for optimum
performance.
The same confirmation message appears when you select the Auto Setup for
Performance option.