Asus P9X79 WS - Manual (Page 108)

3-28 Chapter 3: BIOS setup
Chapter 3
DRAM CTRL REF Voltage on CHC [Auto]
Allows you to set the DRAM CTRL REF Voltage on Channel C. The values range from
0.3950x to 0.6300x with a 0.005x interval.
DRAM DATA REF Voltage on CHC [Auto]
Allows you to set the DRAM DATA REF Voltage on Channel C. The values range from
0.3950x to 0.6300x with a 0.005x interval.
DRAM CTRL REF Voltage on CHD [Auto]
Allows you to set the DRAM CTRL REF Voltage on Channel D. The values range from
0.3950x to 0.6300x with a 0.005x interval.
DRAM DATA REF Voltage on CHD [Auto]
Allows you to set the DRAM DATA REF Voltage on Channel D. The values range from
0.3950x to 0.6300x with a 0.005x interval.
DRAM Read REF Voltage on CHA [Auto]
Allows you to set the DRAM Voltage for CPU IMC to reference Reads on Channel A. The
values range from 0.3850x to 0.6150x with a 0.005x interval. Different ratio might enhance
DRAM overclocking ability.
DRAM Read REF Voltage on CHB [Auto]
Allows you to set the DRAM Voltage for CPU IMC to reference Reads on Channel B. The
values range from 0.3850x to 0.6150x with a 0.005x interval. Different ratio might enhance
DRAM overclocking ability.
DRAM Read REF Voltage on CHC [Auto]
Allows you to set the DRAM Voltage for CPU IMC to reference Reads on Channel C. The
values range from 0.3850x to 0.6150x with a 0.005x interval. Different ratio might enhance
DRAM overclocking ability.
DRAM Read REF Voltage on CHD [Auto]
Allows you to set the DRAM Voltage for CPU IMC to reference Reads on Channel D. The
values range from 0.3850x to 0.6150x with a 0.005x interval. Different ratio might enhance
DRAM overclocking ability.
CPU Spread Spectrum [Auto]
Setting to [Disabled] enhances the BCLK overclocking ability.
Configuration options: [Auto] [Disabled] [Enabled]
PCIE Spread Spectrum [Auto]
Setting to [Disabled] enhances the PCIE overclocking ability.
Configuration options: [Auto] [Disabled] [Enabled]