Asus TX97-XE - Manual (Page 21)

ASUS TX97-X User’s Manual 21
III. INSTALLATION
SIMM Memory Installation
1. The SIMM memory modules will only fit in one orientation as shown because
of a "Plastic Safety Tab" on one end of the SIMM sockets which requires the
"Notched End" of the SIMM memory modules.
R
72 Pin SIMM Sockets
Notched End
1
2
3
4
2. Press the memory module firmly into place starting from a 45 degree angle
making sure that all the contacts are aligned with the socket.
3. With your finger tips, rock the memory module into a vertical position so that it
clicks into place.
Metal Clip
Plastic Safety Tab (This Side Only)
Mounting Hole
72 Pin DRAM in SIMM Socket
4. The plastic guides should go through the two "Mounting Holes" on the sides and
the "Metal Clips" should snap on the other side.
5. To release the memory module, squeeze both "Metal Clips" outwards and rock
the module out of the "Metal Clips".
III. INST
ALLA
TION
(System Memory)