Usb 2.0 controller [enabled, Usb 2.0 controller mode [hispeed, Bios ehci hand-off [enabled – Asus T2-PH1 User Manual

Page 93: Ratio cmos setting [ 8

5 - 2 1

A S U S T 2 - P H 1

USB 2.0 Controller [Enabled]

Allows you to enable or disable the USB 2.0 controller.
Configuration options: [Enabled] [Disabled]

USB 2.0 Controller Mode [HiSpeed]

Allows you to set the USB 2.0 controller mode to HiSpeed (480 Mbps) or
FullSpeed (12 Mbps). Configuration options: [FullSpeed ] [HiSpeed ]

BIOS EHCI Hand-off [Enabled]

Allows you to enable or disable the enhanced host controller interface
(EHCI) hand-off support. This is a workaround for operating systems
without EHCI hand-off support. The ECHI ownership change should be
claimed by the EHCI driver. Configuration options: [Disabled] [Enabled]

5.4.3

CPU Configuration

The items in this menu show the CPU-related information that the BIOS
automatically detects.

Configure advanced CPU Settings

Manufacturer : Intel
Brand String : Genuine Intel(R) CPU 3.20 GHz
Frequency

: 3200 MHz

FSB Speed

: 800 MHz

Cache L1

: 16 KB

Cache L2

: 1024 KB

Cache L3

: 0 KB

Ratio Status: Unlocked
Ratio Actual Value : 16
Ratio CMOS Setting:

[ 8]

VID CMOS Setting:

[ 62]

Microcode Updation:

[Enabled]

Max CPUID Value Limit:

[Disabled]

Enhanced C1 Control

[Auto]

CPU Internal Thermal Control

[Auto]

HyperThreading Technology

[Enabled]

Sets the ratio between
CPU Core Clock and the
FSB Frequency.
NOTE: If an invalid
ratio is set in CMOS
then actual and
setpoint values may
differ.

Ratio CMOS Setting [ 8]

Sets the ratio between the CPU Core Clock and the Front Side Bus
frequency. The default value of this item is auto-detected by BIOS. Use the
<+> or <-> keys to adjust the values.