Asus WL-160g - Manual (Page 19)

ASUS WL-160g USB wireless LAN adapter 2-3
2.2.2 Installing the device
To install the ASUS USB Wireless LAN Adapter in your computer:
1. Connect one end of the USB
cable to the USB port of the
device.
2. Connect the other end of the
USB cable to the USB port of
your computer.
3. Windows ® automatically detects
the device and displays the
Found New Hardware dialog
box. Follow screen instructions
to proceed.
4. Windows ® 2000 users - A Digital
Signature Not Found dialog
box may appear. Click Yes to
proceed.
Windows ® XP users - A Windows Logo Testing Not Found dialog box
may appear. Click Continue Anyway to proceed.
5. After completing installation, configure the ASUS USB Wireless LAN
Adapter using the Wireless Settings utility. Refer to the next chapter for
details.
2
1
2.3 Placement
Take note of the following before placing the device.
• Place the device on a flat, stable surface as far from the ground as
possible
• Keep the device away from metal obstructions and direct sunlight.
• Keep the device away from transformers, heavy-duty motors, fluorescent
lights, microwave ovens, refrigerators, and other industrial equipment to
prevent interference and signal loss.
Install this device at least 20 centimeters from any person to insure
that the product is operated in accordance with the RF Guidelines for
Human Exposure which have been adopted by the Federal
Communications Commission.