Asus WL-160g - Manual (Page 18)

2-2 Chapter 2: Installation
2.1 System requirements
Before installing the ASUS USB Wireless LAN Adapter, make sure that
your system meets the following requirements:
• Intel ® Pentium ® 4 or AMD K7/K8 system
• Minimum 64MB system memory
• Windows ® 2000 (SP4)/XP (SP1) operating system
• Optical drive (for software installation)
• An available USB port (USB 2.0 recommended)
2.2.1 Installing the device drivers and utilities
To install the device driver and utilities in your computer:
1. Insert the support CD to the
optical drive.
2. Click “Install ASUS WLAN
Card Utilities/Driver” when
the ASUS Wireless LAN
Card installation window
appears.
3. The device drivers and
utilities are copied into your
computer.
2.2 Installation procedures
Follow these instructions to install the ASUS USB Wireless LAN Adapter in
your computer.
1. Install the device drivers and utilities from the support CD.
2. Connect the device to your computer.
You must install the ASUS USB Wireless LAN Adapter drivers and
utilities before connecting the device to your computer.
If Autorun is NOT enabled in your computer, browse the contents of the
support CD and double click the Setup.exe file to run the CD.