beautypg.com

Asus ESC700 G2 User Manual

Page 47

background image

3-5

ASUS ESC700 G2

2.

Chassis Fan control setting (3-pin CHAFAN_SEL)

These jumpers allow you to switch for fan pin selection. The CHAFAN_SEL

jumper is for the front fans and rear fans control. Set to pins 1–2 when using

3-pin fans or pins 2–3 when using 4-pin fans.

• If you use a 4-pin fan but set the jumper to pin 1-2, the fan you installed may

not work.

• If you use a 3-pin fan but set the jumper for a 4-pin fan, the fan control will not

work and the fan you installed will always run at full speed.