Asus ESC700 G2 - Manual (Page 102)

4-28 Chapter 4: BIOS setup
VTTCPU Voltage [Auto]
Allows you to set the VTTCPU voltage. The values range from 1.05V to 1.70V with a
0.00625V interval.
PCH 1.1v Voltage [Auto]
Allows you to set the 1.1v Platform Controller Hub voltage. The values range from 1.10V to
1.70V with a 0.00625V interval.
PCH 1.5v Voltage [Auto]
Allows you to set the 1.5v Platform Controller Hub voltage. The values range from 1.50V to
1.80V with a 0.00625V interval.
• The values of the CPU Manual Voltage, CPU Offset Voltage, DRAM
Voltage, VCCSA Voltage, VCCIO Voltage, CPU PLL Voltage, and PCH
Voltage items are labeled in different color, indicating the risk levels of high
voltage settings. Refer to the table below for details.
• The system may need better cooling system to work stably under high
voltage settings.
VTTDDR Voltage (CHA, CHB) [Auto]
Allows you to set the active termination voltage for DRAM on Channel A and B. The values
range from 0.6250V to 1.10V with a 0.00625V interval.
VTTDDR Voltage (CHC, CHD) [Auto]
Allows you to set the active termination voltage for DRAM on Channel C and D. The values
range from 0.6250V to 1.10V with a 0.00625V interval.
DRAM CTRL REF Voltage on CHA [Auto]
Allows you to set the DRAM CTRL REF Voltage on Channel A. The values range from
0.3950V to 0.6300V with a 0.005V interval.
DRAM DATA REF Voltage on CHA [Auto]
Allows you to set the DRAM DATA REF Voltage on Channel A. The values range from
0.3950x to 0.6300x with a 0.005x interval.
DRAM CTRL REF Voltage on CHB [Auto]
Allows you to set the DRAM CTRL REF Voltage on Channel B. The values range from
0.3950x to 0.6300x with a 0.005x interval.
DRAM DATA REF Voltage on CHB [Auto]
Allows you to set the DRAM DATA REF Voltage on Channel B. The values range from
0.3950x to 0.6300x with a 0.005x interval.
DRAM CTRL REF Voltage on CHC [Auto]
Allows you to set the DRAM CTRL REF Voltage on Channel C. The values range from
0.3950x to 0.6300x with a 0.005x interval.