Asus ESC700 G2 - Manual (Page 22)

Chapter 2: Hardware setup 2-4
2.2 Motherboard overview
The barebone server comes with the P9X79 WS/SYS motherboard already installed. The
motherboard is secured to the chassis by nine (9) screws as indicated by the circles in the
illustration below.
Ensure to unplug the power cord before installing or removing any motherboard
component or connection. Failure to do so can cause you physical injury and
damage motherboard components.
Refer to Chapter 3: Motherboard information for detailed information on the
motherboard.
Place this side towards
the rear of the chassis