Asus ESC700 G2 - Manual (Page 41)

2-23 ASUS ESC700 G2
2.9 Connecting cables
The ESC700 G2 chassis includes the power and signal cables that you need to connect to
the motherboard, storage drives, and other devices that you intend to install.
• The bundled system cables are pre-connected before shipment. You do
not need to disconnect these cables unless you will remove pre-installed
components to install additional devices.
• Refer to Chapter 3 for detailed information on the connectors.
Standard cables connected to the motherboard
1. 24-pin EATX power plug
2. 8-pin EATX 12V power plug
3. Card Reader cable
4. Front panel USB 3.0 cable
5. Front panel audio module cable
6. System panel cable
7. System fan cable
8. Front panel USB 2.0 cable
1
2
3
4
5
6
7
8