Asus A7A133 - Manual (Page 68)

ASUS A7A133 User’s Manual 68
4. BIOS SETUP
4. BIOS SETUP Power Up Control
Power On By PS2 Keyboard [Space Bar]
Set this field to [Space Bar] to use the PS2 keyboard to power up the PC.
This feature requires an ATX power supply that can supply at least 300mA
on the +5VSB lead. The default is set to [Disabled] because not all
computers have the appropriate ATX power supply. Your computer will
not power ON if you set this to [Enabled] and do not have the appropriate
ATX power supply. Configuration options: [Disabled] [Space Bar] [Ctrl-
Esc] [Power Key]
Power On By PS2 Mouse [Disabled]
Set this field to [Enabled] to use the PS2 mouse, or consumer IR device to
power up the PC. This feature requires an ATX power supply that can
supply at least 300mA on the +5VSB lead.The default is set to
[Disabled] because not all computers have the appropriate ATX power
supply. Your computer will not power ON if you set this to [Enabled] and
do not have the appropriate ATX power supply. Configuration options:
[Disabled] [Enabled]
Automatic Power Up [Disabled]
This allows an unattended or automatic system power up. You may
configure your system to power up at a certain time of the day by selecting
[Everyday] or at a certain time and day by selecting [By Date]. NOTE:
Automatic Power Up will not work if the system is powered down by
operating systems, such as Windows 98, which have ACPI support
enabled. Configuration options: [Disabled] [Everyday] [By Date]