3 raid controller selection, 4 setting the raid item in bios, Raid controller selection -3 – Asus RS520-E6/RS8 User Manual

Page 97: Setting the raid item in bios -3

Text mode
Original mode

ASUS RS520-E6/RS8

6-3

6.1.3

RAID controller selection

You can choose either the LSI Software RAID Configuration Utility or the Intel

Matrix Storage Manager as the default utility to create RAID set(s). See 5. RAID

configuration utility selection on page 4-6 for details.

6.1.4

Setting the RAID item in BIOS

You must enable the RAID function in the BIOS Setup before creating RAID set(s)

using SATA HDDs. To do this:
1. Enter the BIOS Setup during POST.
2. Go to the Main menu > IDE Configuration, and then press .
3. Set the Configure SATA as item to [RAID].
4. Save your changes, and then exit the BIOS Setup.

Refer to Chapter 5 for details on entering and navigating through the BIOS

Setup.