Asus RS520-E6/RS8 - Manual (Page 88)

5-28 Chapter 5: BIOS setup
5.5 Server menu
The Server menu items allow you to customize the server features.
v02.61 (C)Copyright 1985-2008, American Megatrends, Inc.
BIOS SETUP UTILITY
Main Advanced Server Boot Exit
Remote Access Configuration
←→ Select Screen
↑↓ Select Item
Enter Go to Sub Screen
F1 General Help
F10 Save and Exit
ESC Exit
Configure Remote
Access.
Remote Access Configuration
The items in this menu allows you to configure the Remote Access features. Select
an item then press to display the configuration options.
BIOS SETUP UTILITY
Server
Configure Remote Access type and parameters
Remote Access [Enabled]
Serial port number [COM2]
Base Address, IRQ [2F8h, 3]
Serial Port Mode [57600 8,n,1]
Flow Control [Hardware]
Redirection After BIOS POST [Disabled]
Terminal Type [VT-UTF8]
Select Remote Access
type.
Remote Access [Enabled]
Enables or disables the remote access feature.
Configuration options: [Disabled] [Enabled]
The following items appear only when Remote Access is set to [Enabled].
Serial port number [COM2]
Selects the serial port for console redirection.
Configuration options: [COM1] [COM2]
Base Address. IRQ [2F8h, 3]
This item is not user-configurable and changes with the configuration of Serial port
number.