Asus L3S - Manual (Page 18)

18
Software Reference
Component Overview: Intel® Application Accelerator Driver
The Intel ® Application Accelerator Driver component is a Windows* Hardware Quality Labs
www.microsoft.com/hwtest/default.asp> (WHQL) certified component designed specifically with the in-
tention to increase the disk to system subsystem speed.
The Intel ® Application Accelerator has the ability to query the storage component via an IOCTL interface
and to obtain detailed Ultra ATA Controller and device information, which is displayed in the Device Infor-
mation Property Page, which can be saved to a file and displayed in the Report Property Page.
In addition, a refresh function can be used to refresh the Device Information Property Page when devices are
swapped under mobile configurations. The refresh function can be activated by pressing the “F5” function
key, located on the keyboard, or by clicking on the menu found at “View” then “Refresh F5”.
Component Overview: Displaying Controller and Device Information
When opened, the Devices window in the Device Information property page contains entries for the Intel ®
Ultra ATA controller and all connected ATA/ATAPI. Selecting a particular controller or device in the De-
vices window causes the application to display the corresponding configuration parameters in the Device
Information window. Parameters shown with an oscilloscope icon are read-only; parameters shown with a
wrench icon are read-write. The various parameters are described below on the next screen:
Controller Parameters:
Name Description
IDE Controller Controller product name
Driver Version Device driver version
VxD Build (1) VSD device driver product name
VxD Version (1) VSD device driver version
PIO Mode Support PIO modes supported by controller
DMA SW Mode Support Single-word DMA modes supported by controller
DMA MW Mode Support Multi-word DMA modes supported by controller
UDMA Mode Support Ultra DMA modes supported by controller
Device Parameters:
Name Description
Firmware Device firmware revision
Serial # Device serial number
PIO Mode Support PIO modes supported by device
DMA SW Mode Support Single-word DMA modes supported by device
DMA MW Mode Support Multi-word DMA modes supported by device
UDMA Mode Support Ultra DMA modes supported by device
Disk Size (2) Total size of disk
Current Transfer Mode Device’s current, configured transfer mode
Transfer Mode Limit Used to limit Current Transfer Mode, applies
to any device connected to that cable position
Cable Type (Host) Reports if system BIOS recognizes the device
is connected via a 40- or 80-conductor ATA cable