Asus P5N-MX - Manual (Page 75)

ASUS P5N-MX 2-27
SATA Operation Mode [IDE]
Allows you to select SATA operation mode. Configuration options: [IDE]
[RAID] [AHCI].
Serial-ATA configuration
Select Menu
Item Specific Help
Phoenix-Award BIOS CMOS Setup Utility
Advanced
Serial-ATA configuration
SATA Operation Mode [IDE]
X SATA Pri-Master RAID Disabled
X SATA Pri-Slave RAID Disabled
X SATA Sec-Master RAID Disabled
X SATA Sec-Slave RAID Disabled
The following items become user-configurable when the SATA Operation Mode
item is set to [RAID].
SATA Pri-Master/Slave RAID [Disabled]
Allows you to enable or disable SATA Pri-Master/Slave.
Configuration options: [Disable] [Enabled]
SATA Sec-Master/Slave RAID [Disabled]
Allows you to enable or disable SATA Sec-Master/Slave.
Configuration options: [Disable] [Enabled]
HD Audio Controller [Auto]
Allows you to enable or disable the HD Audio controller.
Configuration options: [Auto] [Disabled]
Front Panel Support Type [HD Audio]
Allows you to set the front panel audio connector (AAFP) mode to legacy AC`97
or high-definition audio depending on the audio standard that the front panel audio
module supports. Configuration options: [AC97] [HD Audio]
Onboard nVidia LAN [Enabled]
Allows you to enable or disable the onboard nVidia LAN device support.
Configuration options: [Disabled] [Enabled]
OnBoard LAN Boot ROM [Disabled]
Allows you to enable or disable the onboard LAN boot ROM.
Configuration options: [Disabled] [Enabled]
Serial Port1 Address [3F8/IRQ4]
Allows you to select the Serial Port1 base address. Configuration options:
[Disabled] [3F8/IRQ4] [2F8/IRQ3] [3E8/IRQ4] [2E8/IRQ3] [Auto]