beautypg.com

5 onboard devices configuration, 6 apm, Onboard devices configuration -20 – Asus A85XM-A User Manual

Page 62: Apm -20

background image

2-20

Chapter 2: BIOS information

UMA Frame Buffer Size [Auto]

This item appears only when you set the previous item to [Force]. Configuration options:

[Auto] [32M] [64M] [128M] [256M] [512M] [1G] [2G]

2.5.5

Onboard Devices Configuration

HD Audio Device [Enabled]

[Enabled]

Enables the High Definition Audio Controller.

[Disabled]

Disables the controller.

The following two items appear only when you set the HD Audio Device item to [Enabled].

Front Panel Type [HD]

Allows you to set the front panel audio connector (AAFP) mode to legacy AC’97 or high-

definition audio depending on the audio standard that the front panel audio module supports.
[HD]

Sets the front panel audio connector (AAFP) mode to high definition audio.

[AC97]

Sets the front panel audio connector (AAFP) mode to legacy AC’97.

SPDIF Out Type [SPDIF]

[SPDIF]

Sets to [SPDIF] for SPDIF audio output.

[HDMI]

Sets to [HDMI] for HDMI audio output.

Realtek LAN Controller [Enabled]

[Enabled]

Enables the Realtek LAN controller.

[Disabled]

Disables the controller.

Realtek PXE OPROM [Disabled]

This item appears only when you set the Realtek LAN Controller item to [Enabled] and

allows you to enable or disable the Rom of the Realtek LAN controller. Configuration options:

[Enabled] [Disabled]

2.5.6

APM

Restore AC Power Loss [Power Off]

[Power On]

The system goes into on state after an AC power loss.

[Power Off]

The system goes into off state after an AC power loss.

[Last State]

The system goes into either off or on state, whatever the system state was

before the AC power loss.

WOL (include AC Power Loss) [Disabled]

[Disabled]

Disables Wake On LAN after a power failure (G3 state).

[Enabled]

Enables Wake On LAN after a power failure (G3 state).