Asus P4V800D-X - Manual (Page 31)

ASUS P4V800D-X Motherboard 1-21
P4V800D-X
®
P4V800D-X ATX power connector
ATXPWR ATX12V
+3 Volts
+3 Volts
Ground
+5 Volts
+5 Volts
Ground
Ground
Power OK
+5V Standby
+12 Volts
-5 Volts
+5 Volts
+3 Volts
-12 Volts
Ground
Ground
Ground
PSON#
Ground
+5 Volts
+12 Volts
+3 Volts
+5 Volts
Ground +12V DC
GND
+12V DC
GND
P4V800D-X
®
P4V800D-X Front Panel Audio Connector
FP_AUDIO
BLINE_OUT_L
MIC2
Line out_R
Line out_L
BLINE_OUT_R
NC
MICPWR +5VA
AGND
7. Front panel audio connectors (10-1 pin FP_AUDIO)
This connector is for the front panel audio cable. This connector supports the
front panel audio I/O ports.
8. ATX power connectors (24-pin EATXPWR, 4-pin ATX12V)
These connectors are for an ATX power supply. The plugs from the power
supply are designed to fit these connectors in only one orientation. Find the
proper orientation and push down firmly until the connectors completely fit.
If you will need to replace the power supply in the future, make sure that your
new ATX 12V power supply can provide 8 A on the +12 V lead and at least 1
A on the +5 V standby lead (+5VSB). The minimum recommended wattage is
230W, or 300W for a fully configured system. The system may become unstable
and may experience difficulty powering up if the power supply is inadequate.