Asus CUBE with Google TV - Manual (Page 44)

Q3. I cannot see the Setup Wizard when I turn on the ASUS CUBE with
Google TV for the first time. The TV screen is blank and the ASUS CUBE with
Google TV’s power LED is on.
• Ensure that the HDMI cable is properly connected to the ASUS CUBE with
Google TV’s HDMI Output (HDMI Out) port and to your TV’s HDMI port. Try
disconnecting and reconnecting the HDMI cable.
• Ensure that your TV is switched to the appropriate video source (AV IN or
HDMI). You may need to use your TV remote control to change video sources.
• Turn off the ASUS CUBE with Google TV and wait for a few minutes before
turning it on again or insert a straigthened paper clip into the manual reset
hole at the right-side of the ASUS CUBE with Google TV.
IMPORTANT: Resetting your ASUS CUBE with Google TV will lead to loss of data such as
configuration settings.
• Ensure that the HDMI resolution of your TV supports 720p, 1080i, or 1080p.
• When you turn off the ASUS CUBE with Google TV, wait until it is completely
turned off. DO NOT press the remote control repeatedly when the remote
control is in the power-off process. Doing so will cause the ASUS CUBE with
Google TV to malfunction. If this occurs, disconnect and then connect the
power adapter to the ASUS CUBE with Google TV.
• When the ASUS CUBE with Google TV and the TV are connected with HDMI
cables via a cable or satellite box, pictures may not be displayed properly due
to the copyright protection feature of some set-top boxes. In this case, contact
your cable/satellite TV service provider.