Asus M4N75TD - Manual (Page 60)

2-10 ASUS M4N75TD
SMART Monitoring [Auto]
Sets the Smart Monitoring, Analysis, and Reporting Technology.
Configuration options: [Auto] [Disabled] [Enabled]
32Bit Data Transfer [Enabled]
Enables or disables 32-bit data transfer. Configuration options: [Disabled] [Enabled]
2.4.6 Storage Configuration
This menu allows you to configure the IDE/SATA devices.
Onboard PCI IDE Controller [Enabled]
Set to [Disabled] to disable the integrated IDE controller or [Enabled] to enable both the
integrated IDE controller and onchip SATA controller.
Configuration options: [Enabled] [Disabled]
OnChip SATA Controller [Enabled]
Enables or disables the OnChip SATA Controller. Configuration options: [Enabled] [Disabled]
SATA Mode select [IDE Mode]
Allows you to select the SATA type.
Configuration options: [IDE Mode] [RAID Mode] [AHCI Mode]
• If you want the Serial ATA hard disk drives to use the Advanced Host Controller Interface
(AHCI), set this item to [AHCI Mode]. The AHCI allows the onboard storage driver to
enable advanced Serial ATA features that increases storage performance on random
workloads by allowing the drive to internally optimize the order of commands.
• If you want to create a RAID configuration from the Serial ATA hard disk drives, set this
item to [RAID Mode].
2.4.7 System Information
This menu gives you an overview of the general system specifications. The BIOS
automatically detects the items in this menu.
BIOS Information
Displays the auto-detected BIOS information.
Processor
Displays the auto-detected CPU specification.
System Memory
Displays the auto-detected system memory.