Asus AP1600R-S5 - Manual (Page 24)

24 Chapter 2: Hardware Setup
2. Position the CPU above the
socket as shown.
3. Carefully insert the CPU into
the socket until it fits in place.
4. When the CPU is in place,
press it firmly on the socket
while you push down the
socket lever to secure the
CPU. The lever clicks on the
side tab to indicate that it is
locked.
Install the CPU
1. Locate the 604-pin ZIF sockets
on the motherboard. Unlock
the socket by pressing the
lever sideways, then lift it up to
at least 115° angle.
NOTE: Make sure that the
socket lever is lifted up to at
least 115° angle, otherwise the
CPU does not fit in completely.
Marked Corner
The CPU fits only in one correct orientation. DO NOT force the
CPU into the socket to prevent bending the pins and damaging
the CPU!
CAUTION