1 removing and installing the chassis cover, Removing the cover, Installing the cover – Asus AP1600R-S5 User Manual

Page 20

Chapter 2: Hardware Setup

2.1

Removing and installing the chassis cover

Removing the cover

1. To release the cover, push the

two latches outward, then
slide the cover towards the
rear for about half an inch.

2. Lift the cover from the chassis.

Installing the cover

1. Place the cover on top of the

chassis leaving about half an
inch gap from the front edge.

2. Firmly hold down the cover and

you slide it towards the front
until it fits in place.

Half-inch gap