beautypg.com

English – Asus CG8270 User Manual

Page 54

background image

5

Chapter 6: Using the utilities

English

English

English

English

Updating the BIOS through a BIOS file

To update the BIOS through a BIOS file:
1.

From the ASUS Update screen, select Update BIOS from file, then click Next.

2.

Locate the BIOS file from the Open window, click Open, and click Next.

.

Click Yes if you want to change the boot logo, which is the image appearing on screen

during the Power-On Self-Tests (POST). Otherwise, click No.

4.

Follow the onscreen instructions to complete the update process.

MyLogo

ASUS MyLogo allows you to customize the boot logo. The boot logo is the image that

appears on screen during the Power-On Self-Tests (POST). ASUS MyLogo allows you to:

• Change the current BIOS boot logo of your motherboard
• Change the boot logo of a downloaded BIOS file and update this BIOS to your

motherboard

• Change the boot logo of a downloaded BIOS file without updating this BIOS to your

motherboard

Ensure that the BIOS item Full Screen Logo is set to [Enabled] to display the boot logo.

See the section Boot Settings Configuration of the BIOS Setup chapter in the user manual.

Changing the BIOS boot logo
1.

From the AI Suite II main menu bar, click Update > MyLogo.

.

Select any of these three options, then click Next:
• Change the BIOS boot logo of my motherboard
• Change the boot logo of a downloaded BIOS file and update this BIOS to my

motherboard

• Change the boot logo of a downloaded BIOS file (But do not update this BIOS to

my motherboard)

Before using the last two options, ensure that you download a BIOS file to your computer

using ASUS Update.

3.

Locate the picture file that you want to use as the boot logo (and the downloaded BIOS

if required) and then click Next.

4.

Move the Resolution slider or click Auto Tune for the system to automatically adjusts

the screen resolution.

5.

Click the Booting Preview button to preview the way the picture is displayed during

the POST. Left-click the mouse to return to the setting screen.

6.

Click Next when the adjustment is finished.

7.

Click Flash and follow the onscreen instructions to complete the process.