Asus M5A99X EVO R2.0 - Manual (Page 115)

ASUS M5A99X EVO R2.0 3-43
Chapter 3
4. Select Yes and press . When BIOS update is done, press to exit BIOS
Updater. Restart your computer.
DO NOT shut down or reset the system while updating the BIOS to prevent system boot
failure!
• For BIOS Updater version 1.04 or later, the utility automatically exits to the DOS
prompt after updating BIOS.
• Ensure to load the BIOS default settings to ensure system compatibility and stability.
Select the Load Optimized Defaults item under the Exit BIOS menu. See Chaper 3
of your motherboard user manual for details.
• Ensure to connect all SATA hard disk drives after updating the BIOS file if you have
disconnected them.
Updating the BIOS file
To update the BIOS file using BIOS Updater:
1.
At the FreeDOS prompt, type bupdater /pc /g and press .
2. The BIOS Updater screen appears as below.
3. Press to switch between screen fields and use the keys
to select the BIOS file and press . BIOS Updater checks the selected BIOS file
and prompts you to confirm BIOS update.
D:\>bupdater /pc /g
ASUSTek BIOS Updater for DOS V1.30 [2012/12/22]
Current ROM Update ROM
A:
Note
[Enter] Select or Load [Tab] Switch [V] Drive Info
[Up/Down/Home/End] Move [B] Backup [Esc] Exit
M5A99XEVO.CAP 2097152 2012-01-06 17:30:48
PATH:
BOARD: M5A99X EVO R2.0
VER: 0204
DATE: 08/05/2010
FLASH TYPE: MX1C 25L1065A
BOARD:
VER:
DATE:
A:\
UNKNOWN
UNKNOWN
UNKNOWN
Are you sure to update BIOS?
Yes No