Asus K8V Deluxe - Manual (Page 48)

2-22 Chapter 2: Hardware information
3. Keyboard power (3-pin KBPWR)
This jumper allows you to enable or disable the keyboard wake-up
feature. Set this jumper to pins 2-3 (+5VSB) if you wish to wake up the
computer when you press a key on the keyboard (the default value is
[Disabled]). This feature requires an ATX power supply that can supply
at least 1A on the +5VSB lead, and a corresponding setting in the
BIOS (see section 4.5.1 Power Up Control).
K8V
®
K8V Keyboard Power Setting
(Default)
+5V +5VSB
KBPWR
2 3 1 2