Hardware setup, 2 layout contents – Asus CUW User Manual
Page 15
ASUS CUW User’s Manual
15
3. HARDWARE SETUP
3.2 Layout Contents
Motherboard Settings
1) JEN
p.18 JumperFree™ Mode (Enable/Disable)
2) VIO
p.19 I/O Voltage Setting (Normal/+3.66V)
3) AUDIO CODEC
p.19 Onboard Audio Setting (Enable/Disable)
4) LAN_EN
p.20 Onboard LAN Setting (Enable/Disable)
5) LAN_PWR
p.20 Onboard LAN Power Setting (Normal/Standby)
6) SAFE_MD
p.21 Safe Mode (Normal/Safe Mode)
7) NO_REBOOT
p.21 Automatic Timeout Reboot (Normal/No Reboot)
8) DSW
p.22 CPU External Clock (BUS) Frequency Setting
Expansion Slots
1) DIMM1, DIMM2, DIMM3
p.24 168-Pin DIMM Memory Support
2) Socket 370
p.26 Central Processing Unit (CPU) Socket
3) ISA1, ISA2
p.27 16-bit ISA Bus Expansion Slots (optional)
4) PCI1, PCI2, PCI3, PCI4, PCI5 p.27 32-bit PCI Bus Expansion Slots (optional PCI6)
5) AMR
p.30 Audio Modem Riser Slot
Connectors
1) PS2KBMS
p.31 PS/2 Mouse Connector (6-pin female)
2) PS2KBMS
p.31 PS/2 Keyboard Connector (6-pin female)
3) USB
p.32 Universal Serial Bus Ports 1 & 2 (Two 4-pin female)
4) PRINTER
p.32 Parallel Port Connector (25-pin female)
5) COM1
p.32 Serial Port COM1 Connector (9-pin male)
6) VGA
p.33 Monitor (VGA) Output Connector (15-pin female)
7) GAME_AUDIO
p.33 Joystick/MIDI Connector (15-pin female) (optional)
8) GAME_AUDIO
p.33 Audio Port Connectors (Three 1/8” female) (optional)
9) RJ45
p.33 Fast-Ethernet Port Connector (RJ45) (optional)
10) PRIMARY/SECONDARY p.34 Primary/Secondary IDE Connectors (Two 40-1pins)
11) FLOPPY
p.34 Floppy Disk Drive Connector (34-1pins)
12) WOL_CON
p.35 Wake-On-LAN Connector (3 pins)
13) WOR
p.35 Wake-On-Ring Connector (2 pins)
14) IDELED
p.36 IDE Activity LED (2 pins)
15) CHA_, CPU_, PWR_FAN p.36 Chassis, CPU, Power Supply Fan Connectors (Three 3-pin)
16) VIDEO, AUX, CD, TAD
p.37 Internal Audio Connectors (Four 4-pins) (optional)
17) SPKEAR
p.37 Internal Speaker Connector (4-pins) (optional)
18) IR (CIR/SIR)
p.38 Infrared Module Connector (10-1 pins)
19) COM2
p.38 Serial Port COM2 Header (10-1 pins)
Layout Contents
3. H/W SETUP