Asus P2L-N - Manual (Page 20)

20 ASUS P2L-N/P2E-N User’s Manual
III. INSTALLATION
CPU
III. INST
ALLA
TION
4. Secure the SEC Cartridge: Secure the SEC cartridge in place by pushing the
SEC cartridge locks outward so that the lock shows through the retention
mechanism’s lock holes.
5. Secure the Heatsink: Install the heatsink support base into the motherboard.
This is not, however, necessary if you use a heatsink with fan (see next page).
The support base is necessary to secure the heatsink (without fan). Secure the
heatsink by sliding the heatsink support top bar into the bottom groove of the
heatsink until it locks into the heatsink support base posts.
Heatsink support
base (7)
6. Attach the Thermal Sensor Connector (optional): If you have purchased the
specially designed fan and thermal monitor heatsink, you can connect the ther-
mal sensor wire to the motherboard through this connector.
R
P2E-N CPU Thermal Sensor Connector
RT4
Heatsink support
top bar (4)
(8)
Heatsink support
base post
(9)
(3)
(8)
(3)