Asus MEB-VM - Manual (Page 15)

15 ASUS MEB-VM User’s Manual
III. HARDWARE SETUP
Jumpers
III. H/W SETUP
1. Jumpers
1. VGA Interrupt Selection (INT_EN) / 2. VGA Setting (VGAEN)
INT_EN allows you to set the VGA interrupt method. The default disables the
chipset’s internal interrupt routing. Some TV tuners or MPEG cards may require
the interrupt be assigned by the onboard chipset, in which case INT_EN must be
enabled. VGAEN allows you to enable or disable the onboard VGA. Disable the
onboard VGA if you are using a VGA card on the expansion slot.
3. Audio Setting (AUDIOEN)
The onboard 32-bit PCI audio may be enabled or disabled using this jumper.
Setting AUDIOEN
Enable [1-2] (default)
Disable [2-3]