Asus DSAN-DX - Manual (Page 114)

5-16 Chapter 5: RAID configuration
8. Follow steps 8 to 12 of the Creating a RAID set: Using Easy Configuration
section.
9. When prompted, save the configuration, then press to return to the
Management Menu.
10. Follow steps 8 to 13 of the Creating a RAID set: Using Easy Configuration
section to add the new RAID configuration.
LSI Logic Software RAID Configuration Utility Ver A.51 Aug 13, 2007
Use Cursor Keys To Navigate Between Items And Press Enter To Select An Option
Management Menu
Configure
Initialize
Objects
Rebuild
Check Consistency
PORT #
DNLIN A00-00
DNLIN A00-01
0
1
Easy Configuration - ARRAY SELECTION MENU
Logical Drive(s) Configured
LD RAID Size #Stripes StripSz Status
0 0 154494MB 2 64 KB ONLINE
0 1 77247MB 2 64 KB ONLINE
Logical Drive 1
RAID = 1
Size = 77247MB
DWC = Off
RA = On
Accept
SPAN = NO
Choose RAID Level For This VD
RAID Level
RAID 0
RAID 1
LSI Logic Software RAID Configuration Utility Ver A.51 Aug 13, 2007
Use Cursor Keys To Navigate Between Items And Press Enter To Select An Option
Management Menu
Configure
Initialize
Objects
Rebuild
Check Consistency
Select Yes Or No
Configuration Menu
Easy Configuration
New Configuration
View/Add Configuration
Clear Configuration
Select Boot Drive
Logical Drive(s) Configured
LD RAID Size #Stripes StripSz Status
0 0 154494MB 2 64 KB ONLINE
1 1 77247MB 2 64 KB ONLINE
Save Configuration?
Yes
No
7. Select the RAID level from the menu, then press .