beautypg.com

Installing an expansion card, Installing a dimm, English – Asus V4-P5P43 User Manual

Page 8

background image

Installation manual

English

Installing an expansion card

2. Remove the metal brac��et loc��.

1. Remove the metal cover opposite

the slot that you intend to use.

3. Insert the card connector to the

slot, then press the card firmly

until it fits in place.

4. Replace the metal brac��et loc��.

Installing a DIMM

1. Locate the DIMM soc��ets in the motherboard.
2. Unloc�� a DIMM soc��et by pressing the retaining clips outward.
3. Align a DIMM on the soc��et such that the notch on the DIMM matches the

brea�� on the soc��et.

4. �ush the DIMM to the soc��et until the retaining clips snap inward.

CAUTION:

Unplug the power supply before adding or removing DIMMs. Failure to do so may

cause damage to the motherboard and/or components.

A DDR2/DDR3 DIMM is keyed with a notch so that it fits in only one direction.

Do not force a DIMM into a soc��et to avoid damaging the DIMM.

1

2

3

4

This manual is related to the following products: