Asus V4-P5P43 - Manual (Page 10)

10 Installation manual
English
4. For SATA �DD: Connect the SATA
signal and power plugs to the
connectors at the bac�� of the drive.
For IDE �DD: Connect the IDE and
power plugs to the connectors at the
bac�� of the drive.
Reinstalling the front panel assembly and
side cover
To reinstall the front panel assembly and side cover:
1. Insert the front panel assembly hinge-li��e tabs to the holes on the right side
of the chassis.
2. Swing the front panel assembly to the left, then insert the hoo��s to the
chassis until the front panel assembly fits in place.
3. Insert the six side cover hoo��s into the chassis tab holes .
4. Push the side cover to the direction of the front panel until it fits in place.
5. Secure the cover with two screws you removed earlier.
SATA IDE
Air duct
5
5
3
4
1
2
1
1
2
2
2
Chassis tab holes