Asus P5KPL IN/SI - Manual (Page 13)

• You may install varying memory sizes in Channel A and Channel B. The system maps
the total size of the lower-sized channel for the dual-channel configuration. Any excess
memory from the higher-sized channel is then mapped for single-channel operation.
• Always install DIMMs with the same CAS latency. For optimum compatibility, we
recommend that you obtain memory modules from the same vendor.
• Due to the memory address limitation on 32-bit Windows OS, when you install 4GB
or more memory on the motherboard, the actual usable memory for the OS can be
about 3GB or less. For effective use of memory, we recommend that you install a 64-bit
Windows OS when having 4GB or more memory installed on the motherboard.
• The default memory operation frequency depends on its SPD. Under the default state,
some memory modules for overclocking may operate at a lower frequency than the
vendor-marked value.
• For system stability, use a more efficient cooling system to support a full memory load
(2 DIMMs) or overclocking conditions.
Qualified Vendors Lists (QVL)
DDR2 667 Qualified Vendors List
Size Vendor Part No.
SS/
DS
Chip Brand Chip NO.
DIMM support
A* B*
1024MB Apacer AU01GE667C5KBGC DS Apacer AM4B5708MIJS7E0627B • •
1024MB Corsair XMS2-5400 DS Corsair Heat-Sink Package • •
2048MB(2x1GB) G.SKILL F2-5400PHU2-2GBNT DS G.SKILL D2 64M8CCF 0815 C7173S • •
512MB Kingston KVR667D2N5/ 512(矮矮) SS Kingston D6408TR7CGL25U • •
1024MB PSC AL6E8E63J-6E1 DS PSC A3R12E3JFF717B9A01 • •
4096MB Samsung M378T5263AZ3-CE6 DS Samsung K4T2G084QA-HCE6 • •
Chapter 1: Product introduction 1-4