Asus P5N72-T Premium - Manual (Page 74)

4-4 Chapter 4: BIOS setup
To update the BIOS using EZ Flash 2:
1. �isit the ASUS website (www.asus.com) to download the latest BIOS file for
the motherboard.
2. Save the BIOS file to a USB flash disk, then restart the system.
3. You can launch the EZ Flash 2 by two methods.
(1) Insert the USB flash disk that contains the BIOS file to the USB port.
Press + during POST to display the following.
4.1.2 ASUS EZ Flash 2 utility
The ASUS EZ Flash 2 feature allows you to update the BIOS without having to
go through the long process of using a DOS-based utility. The EZ Flash 2 utility
is built-in the BIOS chip so it is accessible by pressing + during the
Power-On Self Tests (POST).
(2) Enter BIOS setup program. Go to the Tools menu to select EZ Flash2
and press to enable it.
You can switch between drives by pressing before the correct file
is found. Then press .
ASUSTek EZ Flash 2 BIOS ROM Utility B328
FLASH TYPE: SST 49LF080A /3.3V
BOARD: P5N72-T PREMIUM
VER: 0103
DATE: 04/21/2008
Current ROM Update ROM
BOARD: Unknown
VER: Unknown
DATE: Unknown
PATH: A:\
A:
Note
[Enter] Select [S] Save [ESC] Exit
[Tab] Switch [Up/Down/Home/End] Move
• This function can support devices such as USB flash disk or hard disk with
FAT 32/16 format only.
• Do not shut down or reset the system while updating the BIOS to prevent
system boot failure!
4. When the correct BIOS file is found, �Z Flash 2 performs the BIOS update
process and automatically reboots the system when done.