Asus A78M-A - Manual (Page 56)

2-24 Chapter 2: BIOS information
2.7.4 Chassis Q-Fan Control [Enabled]
[Disabled] Disables the Chassis1 Q-Fan control feature.
[Enabled] Enables the Chassis1 Q-Fan control feature.
Fan Speed Low Limit [600 RPM]
This item appears only when you enable the Chassis1 Q-Fan Control feature and
allows you to disable or set the chassis1 fan warning speed.
Configuration options: [Ignore] [200RPM] [300 RPM] [400 RPM] [500 RPM] [600 RPM]
Q-Fan Profile [Standard]
This item appears only when you enable the Chassis1 Q-Fan Control feature and
allows you to set the appropriate performance level of the chassis fan.
[Standard] Sets to [Standard] to make the chassis fan automatically adjust
depending on the chassis temperature.
[Silent] Sets to [Silent] to minimize the fan speed for quiet chassis fan
operation.
[Turbo] Sets to [Turbo] to achieve maximum chassis fan speed.
[Manual] Sets to [Manual] to assign detailed fan speed control parameters.
The following four items appear only when you set Q-Fan Profile to [Manual].
Q-Fan Upper Temperature [70]
Use the <+> and <-> keys to adjust the upper limit of the chassis temperature. The
values range from 40ºC to 75ºC.
Q-Fan Max. Duty Cycle(%) [100]
Use the <+> and <-> keys to adjust the maximum chassis fan duty cycle. The values
range from 60% to 100%. When the chassis temperature reaches the upper limit,
the chassis fan will operate at the maximum duty cycle.
Q-Fan Lower Temperature [40]
Displays the lower limit of the chassis temperature.
Q-Fan Min. Duty Cycle(%) [60]
Use the <+> and <-> keys to adjust the minimum chassis fan duty cycle. The values
range from 60% to 100%. When the chassis temperature is under 40ºC, the chassis
fan will operate at the minimum duty cycle.
2.7.5 CPU Voltage, 3.3V Voltage, 5V Voltage, 12V Voltage
The onboard hardware monitor automatically detects the voltage output through the onboard
voltage regulators. Select Ignore if you do not want to detect this item.
2.7.6 Anti Surge Support [Auto]
This item allows you to enable or disable the Anti Surge function. Configuration options:
[Auto] [Disabled] [Enabled]