Asus VANGUARD B85 - Manual (Page 75)

ASUS VANGUARD B85 2-37
2.7.7 Chassis Intrusion Detection Support [Enabled]
Connect one end of the chassis intrusion sensor or switch cable to the chassis instrusion
connector. The chassis intrusion sensor or switch cable sends high-level signal to the
connector when a chassis component is removed or replaced. The signal is then generated
as a chassis intrusion event. Configuration options: [Disabled] [Enabled]
2.8 Boot menu
The Boot menu items allow you to change the system boot options.
2.8.1 Fast Boot [Enabled]
[Enabled] Select to accelerate the boot speed.
[Disabled] Select to go back to normal boot.
The following four items appear when you set Fast Boot to [Enabled].
SATA Support [All Devices]
[All Devices] All devices connected to SATA ports will be available during
POST. This process will extend the POST time.
[Hard Drive Only] Only hard drives connected to SATA ports will be detected during
POST. Any hardware change will disable fast boot.
[Boot Drive Only] Only boot drive connected to SATA ports will be detected during
POST. Any hardware change will disable fast boot.