Asus RT-N14UHP - Manual (Page 55)

Setting up the DHCP Server
Your wireless router uses DHCP to assign IP addresses
automatically on your network. You can specify the IP address
range and lease time for the clients on your network.
To configure the DHCP server:
1. Click
LAN on the navigation panel.
. Click the DHCP Server tab.
• Wireless multicast forwarding: Select Enable to allow the
wireless router to forward multicast traffic to other wireless
devices that support multicast. Select Disable to prevent the
router from forwarding multicast transmissions.
• Enable WMM APSD: Enable WMM APSD (Wi-Fi Multimedia
Automatic Power Save Delivery) to improve power
management between wireless devices. Select Disable to
switch off WMM APSD.
• TX Power adjustment: TX Power adjustment refers to the
milliWatts (mW) needed to power the radio signal output of
the wireless router. Enter a value between 0 to 100.
Increasing the TX Power adjustment values may affect the
stability of the wireless network.