Asus RT-N13 - Manual (Page 3)

RT-N13 Wireless Router Quick Start Guide
English
Declaration of Conformity
We, Manufacturer/Importer
(full address)
ASUS COMPUTER GmbH HARKORT STR. 25
40880 RATINGEN, BRD. GERMANY
declare that the product
( description of the apparatus, system, installation to which it refers)
is in conformity with
(reference to the specification under which conformity is declared)
in accordance with 2004/108/EC-EMC Directive and 1995/5 EC-R &TTE Directive
Product name: ASUS SuperSpeedN Wireless Router
Model name : RT-N13
EN 50392 Generic standard to demonstrate the compliance
of electronic and electrical apparatus with the basic
restrictions related to human exposure to
electromagnetic fields (0 Hz-300GHz)
EN 61000-3-2*
EN 61000-3-3*
Disturbances in supply systems caused
Disturbances in supply systems caused
EN 50360
EN 50361
t he limitation of exposure of the general public
to electromagnetic network equipment fields
(0 Hz to 300 GHz) International Commission on
Non-Ionizing Radiation Protection (1998),
Guidelines for limiting exposure in time-varying
electric, magnetic ,and electromagnetic fields
EN 301893
ʳ
EN 300328
Broadband Radio Access Networks (BRAN); 5
GHz high performance RLAN; Harmonized EN
covering essential requirements of article 3.2 of
the R&TTE Directive
Electromagnetic compatibility and Radio
spectrum Matters (ERM); wideband
transmission equipment operating in the
2.4GHz ISM band and using spread spectrum
modulation techniques. Harmonized EN
covering essential requirements under article
3.2 of the R&TTE Directive
EN50081-1
EN50082-2
Generic emission standard Part 1: Residual,
commercial and light industry
Generic immunity standard Part 2: Industrial
environment
EN300440-1
EN300440 -2
Electromagnetic compatibility and Radio
spectrum Matters (ERM);Short Range Devices
(SRD);Radio equipment to be used in the 1
GHz to 40 GHz frequency range; Part 1:
Technical characteristics and test methods
Part 2: Harmonized EN under article 3.2 of the
R&TTE Directive
EN 55020
EN 55022
Immunity from radio interference of broadcast
receivers and associated equipment
Limits and methods of measurement of radio
disturbance characteristics of information technology
equipment
EN 301511 Global System for Mobile communications
(GSM);Harmonized EN for mobile stations in
the GSM 900 and GSM 1800 bands covering
essential requirements under article 3.2 of the
R&TTE directive (1999/5/EC)
EN 55024
EN 55013
Information Technology equipment-Immunity
characteristics-Limits and methods of measurement
Limits and methods of measurement of radio
disturbance characteristics of broadcast receivers
and associated equipment
EN 301 908-1
EN 301 908-2
Electromagnetic compatibility and Radio
spectrum Matters (ERM);Base Stations (BS),
Repeaters and User Equipment (UE) for
IMT-2000 Third-Generation cellular networks;
Part 1: Harmonized EN for IMT-2000,
introduction and common requirements,
covering essential requirements of article 3.2 of
the R&TTE Directive
EN 50385
EN 300386
Product standard to demonstrate the compliances or
radio Base stations and fixed terminal stations for
wireless telecommunication systems with the basic
restriction or the reference level to human exposure
to radio frequency electromagnetic) field (110MHZ-
40GHZ) -General public
Electromagnetic compatibility and Radio spectrum
Matters (ERM);Telecommunication Electromagnetic
Compatibility (EMC) requirements
EN 301489 -1
ʳ EN 301489 -17
Electromagnetic compatibility and Radio
spectrum Matters (ERM); Electromagnetic
compatibility(EMC) standard for radio
equipment and services; Part 17: Specific
conditions for wideband data and HIPERLAN
equipment, Part1: Common technical
requirements
CE marking
(EC conformity marking)
EN 60065
The manufacturer also declares the conformity of above mentioned product
with the actual required safety standards in accordance with LVD 2006/95/EC
Safety requirements for mains operated EN 60950-1 Safety for information technology equipment
electronic and related apparatus for including electrical business equipment
household and similar general use
Manufacturer/Importer
(Stamp)
Date : Aug. 29 , 2008