Asus RT-N13 - Manual (Page 11)

RT-N13 Wireless Router Quick Start Guide
10
English
3. To set up your wireless interface, specify
an SSID (Service Set Identifier), which
is a unique identifier attached to packets
sent over WLAN. This identifier emulates
a password when a device attempts to
communicate with your wireless router
via WLAN.
If you want to protect transmitted data,
select a Security Level to enable
encryption methods.
Medium: Only users with the same WEP key settings can connect to your wireless
router and transmit data using 64bits or 128bits WEP key encryption.
High: Only users with the same WPA pre-shared key settings can connect to your
wireless router and transmit data using TKIP encryption.
PPTP user
If you are using PPTP services, select
ADSL connection that requires
username, password and IP address. Fill
in the username, password and IP address
provided by your ISP into the fields. Click
Next to continue.
Static IP user
If you are using ADSL or other connection
type that uses static IP address, select
ADSL or other connection type that
uses static IP address. Input the IP
address, subnet mask, and default
gateway provided by your ISP. You
can specify DNS servers, or get DNS
information automatically.