Asus RS160-E4/PA4 - Manual (Page 9)

ix
About this guide
Audience
This user guide is intended for system integrators, and experienced users with at
least basic knowledge of configuring a server.
Contents
This guide contains the following parts:
1.. Chapter.1:.Product.Introduction
This chapter describes the general features of the server, including sections
on front panel and rear panel specifications.
2.. Chapter.2:.Hardware.setup
This chapter lists the hardware setup procedures that you have to perform
when installing or removing system components.
3.. Chapter.3:.Installation.options
This chapter describes how to install optional components into the barebone
server.
4.. Chapter.4:.Motherboard.information
This chapter gives information about the motherboard that comes with the
server. This chapter includes the motherboard layout, jumper settings, and
connector locations.
5.. Chapter.5:.BIOS.information
This chapter tells how to change system settings through the BIOS Setup
menus and describes the BIOS parameters.
6. Chapter 6: RAID configuration
This chapter tells how to change system settings through the BIOS Setup
menus. Detailed descriptions of the BIOS parameters are also provided.
7. Chapter.7:.Driver.installation
This chapter provides instructions for installing the necessary drivers for
different system components.
8.. Appendix:.Reference.information
This appendix includes additional information that you may refer to when
configuring the system.