Asus RS160-E4/PA4 - Manual (Page 85)

ASUS RS160-E4/PA4 5-15
Serial.ATA.[Enabled]
Allows you to enable or disable the Serial ATA function.
Configuration options: [Disabled] [Enabled]
SATA Controller Mode Option [Enhanced]
Allows selection of the Serial ATA operation mode depending on the operating
system (OS) that you installed. When you set this item to Enhanced Mode,
Serial ATA and Parallel ATA devices are auto-detected and placed in native
IDE mode. Set to Enhanced Mode if you are using native OS, such as
Windows ® 2000/XP. When you set this item to Compatible Mode, Serial ATA
and Parallel ATA devices are auto-detected and placed in legacy mode. Set
this item to [Compatible] if you are using legacy OS, e.g. Windows ME/98/NT,
MS-DOS. Configuration options: [Compatible] [Enhanced]
The following items appear only if you set the SATA.Controller.Mode.Option
item to [Enhanced].
SATA.RAID.Enable.[Disabled]
Allows you to enable or disable the Serial ATA RAID function.
Configuration options: [Disabled] [Enabled]
SATA.AHCI.Enable.[Disabled]
Allows you to enable or disable the Serial ATA AHCI function.
Configuration options: [Disabled] [Enabled]
• SATA.AHCI.Enable item appears only when SATA.RAID.Enable is set to
[Disabled]
• AHCI mode item supports only under Windows environment.
• Due to the driver limitation, you will not find any SATA driver if you install
Fedora core 4.
Native.Mode.Operation.[Auto]
Allows you to choose the native mode for ATA.
Configuration options: [Auto] [Serial ATA]
The above item appears only when the SATA.Controller.Mode.Option is set to
[Compatible]