Asus RS160-E4/PA4 - Manual (Page 154)

6-40 Chapter 6: RAID configuration
4. After selecting, the volumes with “Rebuild” status will be rebuilt within the
operating system.
5. Exit the SATA RAID utility. When operating system is running, select the Intel
Matrix Storage Console from the Start Menu or click the Intel Matrix Storage
Manager tray icon.
6. From the View menu, select ‘Advanced Mode’ to display a detailed view of
the Intel Matrix Storage Console.
7. From the Volumes view in the device pane, select the RAID volume. The
status will display ‘Rebuilding % complete’. After the rebuild is complete, the
status will display ‘Normal’.
Rebuilding the RAID with new installed disk:
1. If one member of physical SATA Hard disk within the array is off-line or failed,
the status of array will become to be degraded from normal. The following
displays as.
2. Remove the failed SATA hard disk and install the same specification of new
SATA hard disk into the same SATA Port. After reboot, the rebuild will occur
automatically.
The size of new disk for rebuilding should be the same or bigger as the original
hard disk.