Asus RS160-E4/PA4 - Manual (Page 102)

5-32 Chapter 5: BIOS setup
The following items appear only if you enable the Power.On.By.RTC.Alarm
item.
RTC.Alarm.Date.[0]
To set the date of alarm, highlight this item and press to display a date
chart. Press <+> or <-> to change scroll through the options, then press
when done. The default setting [0] is equivalent to everyday alarm.
Configuration options: [0] [1] ~ [31]
RTC.Alarm.Date.[00.:.00.:.00]
To set the time of alarm:
1. Press <+> or <-> to set the desired value.
2. Use the left/right arrow key or press to move to the next field.
3. Press when done.
F1 Help ↑↓ Select Item -/+ Change Values F9 Setup Defaults
ESC Exit →← Select Menu Enter Select Sub-Menu F10 Save and Exit
Item Specific Help
To select the fan speed
control model.
Hardware Monitor
CPU1 Domain 0 Temperature 39 o C/102 o F
CPU1 Domain 1 Temperature 29 o C/84 o F
CPU2 Domain 0 Temperature 0 o C/32 o F
CPU2 Domain 1 Temperature 0 o C/32 o F
SYSTEM1 Temperature 39 o C/102 o F
SYSTEM2 Temperature 29 o C/84 o F
Smart Fan Control [Smart Fan II]
CPU1 Domain 0 Target Temperature [76 ºC]
CPU1 Domain 1 Target Temperature [76 ºC]
CPU2 Domain 0 Target Temperature [76 ºC]
CPU2 Domain 1 Target Temperature [76 ºC]
SYSTEM1 Target Temperature [70 ºC]
SYSTEM2 Target Temperature [70 ºC]
FAN1 6569RPM
PhoenixBIOS Setup Utility
Advanced
5.4.8. Hardware.Monitor
This menu shows the hardware monitor configuration settings. Select an item then
press to display the configuration options.
The following screens appear when you install a Intel ® 5000 series CPU.