Asus K8N-LR - Manual (Page 80)

4-26 Chapter 4: BIOS setup
IRQ-xx assigned to [PCI Device]
When set to [PCI Device], the specific IRQ is free for use of PCI/PnP
devices. When set to [Reserved], the IRQ is reserved for legacy ISA
devices. Configuration options: [PCI Device] [Reserved]
4.4.5 MPS Configuration
The items in this menu allows you to configure the Multi-Processor Table.
Select an item then press to display the configuration options.
MPS Revision [1.4]
Allows you to select the multi-processor system revision.
Configuration options: [1.1] [1.4]
MPS Configuration
MPS Revision [1.4]
Select MPS Revision.
4.4.6 Remote Access Configuration
The items in this menu allows you to configure the Remote Access
features. Select an item then press to display the configuration
options.
Configure Remote Access type and parameters
Remote Access [Enabled]
Serial port number [COM1]
Base Address [3F8h, 4]
Serial Port Mode [115200 8,n,1]
Flow Control [None]
Redirection After BIOS POST [Always]
Terminal Type [ANSI]
VT-UTFB Combo Key Support [Enabled]
Media Type [Serial]
Select Remote Access
type.
Remote Access [Enabled]
Enables or disables the remote access feature.
Configuration options: [Disabled] [Enabled]