Hardware setup, 18 asus mes user’s manual – Asus MES User Manual

Page 18

ASUS MES User’s Manual

3. HARDWARE SETUP

Motherboard Settings

3. H/W SETUP

Motherboard Feature Settings (DIP Switches – DSW1 & DSW2)
The motherboard’s onboard functions are adjusted through the DIP switches. The
white block represents the switch’s position. The example below shows all the
switches in the OFF position.

MES

MES DIP Switches

1. Frequency Selection
2. Frequency Selection
3. Frequency Selection
4. Frequency Selection
5. Memory Data Transfer
6. VIO Setting
7. VIO Setting
8. Core Voltage (Vcore) Setting

DSW1

OFF

DSW2

1. Frequency Multiple
2. Frequency Multiple
3. Frequency Multiple
4. Frequency Multiple
5. Onboard VGA Setting
6. VGA Frame Buffer Setting
7. LCD Setting
8. Onboard Audio Setting

OFF

1) Keyboard Wake Up (3-pin KB WAKEUP)

This allows you to disable or enable the keyboard power up function. Set this
jumper to Enable if you wish to use your keyboard (by pressing any key or the
spacebar depending on your motherboard) to power up your computer. This
feature requires an ATX power supply that can supply at least 300mA on the
+5VSB lead. The default is set to Disable because not all computers have the
appropriate ATX power supply. Your computer will not power ON if you set this
to Enable and do not have the appropriate ATX power supply.

MES

MES Keyboard Wake Up

Disable

(Default)

KB WAKEUP

Enable

1 2 3