Asus M3A78-EH - Manual (Page 38)

1-26 Chapter 1: Product introduction
2. USB device wake-up (3-pin USBPW1-4, USBPW5-8, USBPW9-12)
Set these jumpers to +5V to wake up the computer from S1 sleep mode
(CPU stopped, DRAM refreshed, system running in low power mode) using
the connected USB devices. Set to +5VSB to wake up from S3 and S4 sleep
modes.
The USBPW1-4 jumpers are for the rear USB ports. The USBPW5-8 and
USBPW9-12 jumpers are for the internal USB connectors that you can
connect to additional USB ports.
• The USB device wake-up feature requires a power supply that can
provide 500mA on the +5VSB lead for each USB port; otherwise,
the system will not power up.
• The total current consumed must NOT exceed the power supply
capability (+5VSB) whether under normal condition or in sleep mode.
R
M3A78-EH
M3A78-EH USB Device Wake Up
3
2 2
1
PS2_USBPW1-4
(Default)
+5V +5VSB
3 2 2 1
USBPW5-8
USBPW9-12
(Default)
+5V +5VSB
3 2 2 1
(Default)
+5V +5VSB