Asus ASMB4-iKVM - Manual (Page 32)

2-14 Chapter 2: Installation
2.5.2 Configuring the user name and password
You may change your user name and password from the ASMC4 utility.
To change the user name and password:
1. Follow steps 1-5 on page 2-11.
2. When the
When the C:> prompt appears, type type asmc4 -user_name xxxxx, then
press to change the user name.
C:\>asmc4 -user_name super
Detect MotherBoard -> (Z8PE-D12X)
Detect KCS Interface
Change User Name to super
C:\>
3. Type asmc4 -user_password xxxxxxxx, then press to change
the password.
4. Restart the remote server, enter the BIOS setup, then boot from the hard disk
drive.