Asus AT3IONT-I DELUXE - Manual (Page 17)

ASUS AT3IONT-I Series 1-8
1.6 Jumpers
1. Clear RTC RAM (3-pin CLRTC)
This jumper allows you to clear the Real Time Clock (RTC) RAM in CMOS. You can
clear the CMOS memory of date, time, and system setup parameters by erasing
the CMOS RTC RAM data. The onboard button cell battery powers the RAM data in
CMOS, which include system setup information such as system passwords.
Except when clearing the RTC RAM, never remove the cap on CLRTC jumper default
position. Removing the cap will cause system boot failure!
AT3IONT-I DELUX
E
AT3IONT-I SERIES Clear RTC RAM
1
2 2
3
Normal
(Default)
Clear RTC
CLRTC
If the steps above do not help, remove the onboard battery and move the jumper again to
clear the CMOS RTC RAM data. After clearing the CMOS, reinstall the battery.
To erase the RTC RAM:
1. Turn OFF the computer and unplug the power cord.
2. Move the jumper cap from pins 1-2 (default) to pins 2-3. Keep the cap on pins 2-3
for about 5-10 seconds, then move the cap back to pins 1-2.
3. Plug the power cord and turn ON the computer.
4. Hold down the key during the boot process and enter BIOS setup to re-enter
data.
1.7 Connectors
1.7.1 Rear panel connectors
5
12 13 14 15 16 11
7 8
9
2 3 1 6
10
4
E5276_AT3IONT-I_Series.indb 8 1/28/10 2:49:19 PM