Asus F2A85-V PRO - Manual (Page 72)

3-8 Chapter 3: BIOS setup
Chapter 3
Ai Overclock Tuner [Auto]
Allows you to select the CPU overclocking options to achieve the desired CPU internal
frequency. Select any of these preset overclocking configuration options:
[Auto]
Loads the optimal settings for the system.
[Manual] Allows you to individually set overclocking parameters.
The following item appears only when you set the Ai Overclocking Tuner item to [Manual].
APU Frequency [XXX]
Allows you to adjust the APU frequency to enhance the system performance. Use the <+>
and <-> keys to adjust the value. You can also key in the desired value using the numeric
keypad. The values range from 80.0MHz to 300.0MHz.
Memory Frequency [Auto]
Allows you to set the memory operating frequency. The configuration options vary with
the APU Frequency item settings. Configuration options: �Auto�� �DDR3-800MHz�� �DDR3- . Configuration options: �Auto�� �DDR3-800MHz�� �DDR3-
1066MHz�� �DDR3-1333MHz�� �DDR3-1600MHz�� �DDR3-1866MHz�� �DDR3-2133MHz�� �DDR3-
2400MHz��
Selecting a very high memory frequency may cause the system to become unstable! If this
happens, revert to the default setting.
APU Multiplier [Auto]
Allows you to set the multiplier between the APU Core Clock and the APU Bus Frequency.
Use the <+> and <-> keys to adjust the value. You can also key in the desired value using the
numeric keypad.
NB Frequency [Auto]
Allows you to adjust the NB frequency. Use the <+> and <-> keys to adjust the value. You
can also key in the desired value using the numeric keypad.
EPU Power Saving Mode [Disabled]
Allows you to enable or disable the EPU power saving function. Configuration options:
[Disabled] [Enabled]
EPU Setting [Auto]
This item appears only when you set the EPU Power Saving Mode item to [Enabled] and
allows you to select the EPU power saving mode. Configuration options: �Auto�� �Light Power
Saving Mode] [Medium Power Saving Mode] [Max Power Saving Mode]
GPU Boost [Auto]
�Auto�� Automatic configuration.
[Turbo Mode] Set to [Trubo Mode] to achieve better 3D performance.
[Extreme Mode] Set to [Extreme Mode] for the excellent visual experience.
[Manual Mode] Set to [Manual Mode] if you want to manually select the desired GPU
Engine frequency.