1 fast boot [enabled, 2 full screen logo [enabled, Fast boot [enabled] -26 – Asus F2A85-V User Manual
Page 72: Full screen logo [enabled] -26

2-26
ASUS F2A85-V
2.7.1
Fast Boot [Enabled]
Enable or disable boot with initialization of a minimal set of devices to launch active boot
option. Configuration options: [Disabled] [Enabled]
The following four items appear only when you set Fast Boot to [Enabled].
USB Support [Partial Initialization]
[Disabled]
All USB devices will not be available until OS bootup for a fastest
POST time.
[Full Initialization]
All USB devices will be available during POST. This process will
extend the POST time.
[Partial Initialization]
For a faster POST time, only the USB ports with keyboard and
mouse connections will be detected.
PS/2 Keyboard and Mouse Support [Auto]
The settings of this item only take effect when the Fast Boot item is enabled and when a
PS/2 keyboard and a PS/2 mouse are connected.
[Auto]
For a faster BIOS POST time, PS/2 devices are available when the system
boots up or is rebooted when PS/2 devices have not been reconnected or
changed.
[Full Initial]
For full system control, PS/2 devices are always available during POST.
This process extends POST.
[Disabled]
For the fastest POST time, all PS/2 devices are available after the PC
enters the OS.
Network Stack Driver Support [Disabled]
[Disabled]
The BIOS skips over the Network Stack Driver and tries to boot from the
next device.
[Enabled]
Allows the BIOS to boot from the Network Stack Driver.
Next boot after AC Power Loss [Normal Boot]
[Normal Boot] Returns to normal boot on the next boot after an AC power loss.
[Fast Boot]
Accelerates the boot speed on the next boot after an AC power loss.
2.7.2
Full Screen Logo [Enabled]
[Enabled]
Enables the full screen logo display feature.
[Disabled]
Disables the full screen logo display feature.
Set this item to [Enabled] to use the ASUS MyLogo 2™ feature.
Post Report [5 sec]
This item appears only when the Full Screen Logo item is set to [Disabled] and allows you to
set the waiting time for the system to display the post report. Configuration options: [1 sec] [2
sec] [3 sec] [4 sec] [5 sec] [6 sec] [7 sec] [8 sec] [9 sec] [10 sec] [Until Press ESC]